Arduino Pro Mini 5V/16Mhz Compatible

Overview:

The Arduino Pro Mini Atmega328P is a small microcontroller board designed for semi-permanent installation into projects that require few to no reiterations. The Arduino Board doesn’t have pre-mounted headers, allowing the user to determine which types of connectors or soldering they will use. Unique features of the board include an off board USB connection, auto-reset support, over current protection, a 5V regulator, as well as on-board status and power LEDs.

Features:

• The Arduino Pro Mini can be programmed with the Arduino IDE
• Power can be regulated +5V power source (e.g. from the +5V pin of the Mini USB Adapter or an Arduino NG) connected to the +5V pin of the Arduino Mini. Or, a +9V power source (e.g. a 9-volt battery) connected to the +9V pin of the Arduino Mini.
• Ground. One of the ground pins on the Arduino Mini must be connected to the ground of the power source.
• TX/RX. These pins are used both for uploading new sketches to the board and communicating with a computer or other device.
• Reset. Whenever this pin is connected to the ground, the Arduino Mini resets. You can wire it to a pushbutton, or connect it to +5V to prevent the Arduino Mini from resetting (except when it loses power). If you leave the reset pin unconnected, the Arduino Mini will reset randomly.
• An LED. While not technically necessary, connecting an LED to the Arduino Mini makes it easier to check if it’s working. Pin 13 has a 1 KB resistor on it, so you can connect an LED to it directly between it and the ground. When using another pin, you will need an external resistor.

Specification:

• 14 digital input / output ports RX, TX, D2 ~ D13,
• 8 analog input ports A0 ~ A7
• 1 TTL level serial port transceiver port RX / TX
• 6 PWM ports: D3, D5, D6, D9, D10, D11
• Using Atmel Atmega328P-AU microcontroller
• Supports serial download
• Board power supply: 5v ~ 12V DC power supply
• Circuit Operating Voltage: 5V
• UART: 1
• SPI: – 1
• I2C: 1
• External Interrupts: 2
• DC Current per I/O Pin: 40mA
• Flash Memory: 32KB (2KB Reserved by Bootloader)
• SRAM: 2KB
• EEPROM: 1KB
• Clock Speed: 16MHz with External Resonator (0.5% Tolerance)
• Supports 9V battery powered
• Size:33.3 * 18.0mm

Resources:

• Arduino Pro Mini

Package includes:

• 1 x Arduino Pro Mini
• 1 pack of headers