W1209 Digital DC12V Temperature Controller

Overview:

The W1209 Digital DC12V Temperature Controller is a programmable thermostat for 12V Applications e.g. indoor room temperature control and aquarium temperature control. The same module can be used in both controlling / maintaining cooling and heating temperatures. The relay module is based on a microcontroller (MCU) and has 7 user configurable parameters using 3 push buttons. The temperature sensor allows the module to intelligently control varied electrical devices based on the temperature.

Features:

• Fast Acting Control of 0.5 seconds response time
• Water proof sensor
• LED Display for Temperature, settings and warning
• LED Relay Status Indicator
• Output Relay can be used with both AC and DC circuits

Specification:

• Temperature range :-50~110°C
• Temperature control mode: ON / OFF
• Resolution : When temperature is 0.1°C, the resolution is -9.9~99.9, other temperature segment is 1°C
• Control accuracy : 0.1°C
• Hysteresis accuracy : 0.1°C
• Refresh rate : 0.5S
• High temperature protection: 0~110°C
• Supply voltage : DC 12V
• Static current : ≤35MA, attract current ≤65MA
• Output voltage : DC 12V
• Output power : 10A relay
• Measurement input : NTC (10K 0.5%) Waterproof Sensor
• Environmental requirements : -10 ~ 60°C, Humidity 20% -85%
• Dimensions : 48.5x40mm

Instructions:

• Connect the power supply and to the module , the measuring temperature is displayed, press the "SET" button, press " + or - " to set the desired temperature (long press " + or - " to quickly increase or decrease), press "SET" to confirm the setting and return, controller Automatically performs the relay ON/OFF.
• The thermostat output is 10A relay, meet a variety of high-power loads,
• LED Indicator : LED off indicates the relay off; Lighting, indicates the relay is closed.
• Digital LED Tubes : "LL" indicates sensor open, "HH" indicates overrange, the relay will be forcibly disconnected; "---" indicates high temperature alarm
• Long press the "SET" button to enter the main menu settings, press " + or - " to switching between P0-P6,then long press "SET" or 10 seconds without keystrokes to confirm the setting and return.

Button Parameters:

• P0 : Cooling / Heating; Range: C/H; Default: C
• P1 : Hysteresis Setting; Range:0.1-15; Default: 2
• P2 : Highest Setting Limit; Range:110; Default: 110
• P3 : Lowest setting Limit; Range:-50; Default: -50
• P4 : Temperature Correction; Range:-7-7°C, Default: 0°C
• P5 : Delay Start Time; Range:0-10 Minute; Default: 0
• P6 : Key Tone Switch; Range:0-110; Default: Off
• When the Thermostat is power off, long press " - or + ", you can restore the factory settings

Package includes:

• 1 x W1209 Digital DC12V Temperature Controller